Exness Currency Converter
The box on this page answers one bounded question: what a single amount is worth in another currency at an indicative mid rate, and what one position of the size you type would look like line by line. It does not know your account, it does not add several positions together and it carries no figure forward. Everything past that single line — totalling a set of orders, deciding what the result means for the next one, and re-checking it on the order screen before acting — is manual work.
Two boxes, one boundary. The upper one converts an amount between USD, EUR, GBP, JPY, CAD and AUD at an indicative mid rate derived from spreads measured on a live Exness account. The lower one prices a single position from the instrument, direction, volume and leverage you enter. Both return reference figures rather than the exact rate or cost applied in practice, and neither reaches past the one line you typed.
| Per position | USD | EUR | GBP | JPY |
|---|---|---|---|---|
| Pip value | — | — | — | — |
| Spread cost | — | — | — | — |
| Swap / night | — | — | — | — |
| Margin | — | — | — | — |
| Notional | — | — | — | — |
One row, one moment: these figures belong to the single position described in the fields, at live measured mid rates, with the swap sign following the direction. A set of positions has to be added up by hand.
Calculations use spreads and contract specs measured on a live Exness Standard account (2026-08-13). Figures are indicative — spreads may fluctuate and actual results will vary.
How much is $100 in euros at the measured rate?
At the mid rate measured on a live Exness Standard account, EUR/USD trades near 1.15254, so $100 converts to about €86.76. The same mid works both ways: €100 is about $115.25. This is an indicative interbank-style mid rate shown for reference; the exact rate applied in practice can differ.
Figures are indicative, from spreads and contract specs measured on a live Exness Standard account (2026-08-13). Converted to Pakistani rupee (PKR), the same amounts follow the current exchange rate, which changes through the day.
Frequently asked questions
Is this the exact rate I will get?
How much is 1 USC on a cent account?
Does this page know anything about my account?
Can I total several positions in one pass?
Is the converted amount the amount I would receive?
Why does only the margin line move when I change leverage?
What does the page keep after I close it?
Should I open a trade on the figure shown here?
The swap line covers one night — what about a longer hold?
Why are only four currencies shown in the position table?
Have an idea to make this calculator better? Share it with the team on Live Help →
A request for a field the calculator does not have is the most useful kind — it marks where the manual work still begins.
What the fields actually take
Read the tool as a machine with a fixed appetite. On the simple side it accepts an amount and two currencies. On the position side it accepts an instrument, a direction, a volume in lots and a leverage setting. That is the entire input list, and every figure returned is an answer to exactly those entries — change one and you have asked a different question, even though the page looks the same.
Because the input list is fixed, the output is bounded in the same way. A pip value, a spread cost, a swap line and a margin figure all describe the one line you described. They are not a statement about your account and they are not a projection onto the next position.
This is worth saying plainly, because the shape of the output invites a wider reading. A tidy four-column table looks like a summary of a position book. It is a summary of one row.
Four things this page cannot see
The first is your balance. Nothing here is connected to an account, so equity, free margin and the room you have left sit outside the calculation entirely.
The second is everything you already hold. If two lines are open and a third is being sized here, the margin figure shown belongs to the third one alone; adding them together is your arithmetic, not the tool's.
The third is intent. The box has no view on whether the volume you typed suits the plan you are working to — it prices 0.01 lots and 5 lots with the same indifference.
The fourth is anything that happens outside the trading account. A converted amount is an indicative mid figure shown for reference; what a transfer looks like on the other side of the account is handled elsewhere and never appears in this table.
Where the manual arithmetic begins
A basket. Enter each line, note each result and add the columns yourself — the page holds no memory between entries and will not total them for you.
A sequence. A plan built from several entries in turn is a chain of separate calculations, each with its own inputs, and there is no field here for the chain.
A longer hold. The swap line is stated for a single night at the inputs shown, so anything held longer is a multiplication you make on paper.
A different unit of account. The per-position table reports in USD, EUR, GBP and JPY; if your own record keeping sits outside those four, the last conversion is yours.
Keeping your own working
The habit that makes a bounded tool useful is a written line — entries on the left, result on the right, and the reason you asked. Reload the page and the fields reset: nothing is stored here, and nothing here can be checked back later.
The last step is always outside the page. The order screen in the terminal prices a trade with the account's own settings, and that is the figure a position is opened on. A result from this page is a rehearsal for it, not a substitute.
That gap is not a flaw in the tool. An indicative mid rate is published as a reference point on purpose, so the honest way to use it is as a reference point.
Turning a converted figure into a decision
- Write the entries down before you read the result — amount, pair, direction, volume and leverage. A figure without its inputs proves nothing an hour later.
- Read each returned line as a property of that one position: pip value, spread cost, a single night of swap, margin, notional.
- Do the parts the page leaves out — total the lines you actually plan to hold, and translate the result into whatever unit your own record uses.
- Open the same trade on the order screen without confirming it, and compare the volume and margin the terminal shows against the rehearsal.
- Keep the note. When the same entries return a different answer later, the note is what tells you which side moved.
Figures on this page are indicative and shown for reference; the terminal is what prices a live order.
Scope map — inside the box and outside it
| Question | Answered on this page | Left to the trader |
|---|---|---|
| What is this amount in another currency? | Yes, at an indicative mid rate | Whether that reference is the one your purpose needs |
| What does one position of this size look like? | Yes: pip value, spread cost, swap, margin, notional | Whether that size is the one to use |
| What do three positions come to together? | No — one line per pass | Adding the lines up |
| How much room is left on my account? | No — nothing here reads an account | Reading free margin in the terminal |
| What will the order be opened at? | No — this is a rehearsal figure | Checking the order screen before confirming |
The page is a calculator, not a record: it keeps nothing between visits.
What each field changes, and what it leaves alone
| Field | Moves these outputs | Leaves untouched |
|---|---|---|
| Amount | The converted figure | Everything in the position table |
| Instrument | Pip value, spread cost, swap line, notional | Your account settings |
| Direction | The sign of the swap line | Margin and notional |
| Volume in lots | Pip value, spread cost, swap, margin, notional | The mid rate itself |
| Leverage | The margin figure | Pip value, spread cost, notional |
Structural behaviour of the fields — not a statement about market conditions.